First of all download the firmware of your phone (using naviform, .ppm, .mcusw, .cnt files)
NOW read carefully...
Now Disable/uninstall PC suite, SW Updater (NSU). (just right click on pc suite taskbar icon and click exit)
Download and install JAF
Download link:
http://rapidshare.com/files/245475090/jaf_1.98.62_setup.exe
Open JAF
Go to BB5 tab
Connect phone in "PC suite" mode
tick manual flash, factory set and normal mode. Also CRT 308 but it's already ticked.
If you're flashin a DEAD phone, tick the manual flash, Factory set, Normal mode and dead flash.
And remove tick from CRT308
select the
MCU (the renamed **.c0r file),
PPM,
CNT (the **.image file),
Plug in the phone to charger.
In case of dead flashing, don't connect the charger yet.
HIT "FLASH"
Hit "OK"
In case of dead flashing, When jaf says "PRESS POWER ON NOW" , connect the charger and turn on the phone.
the screen should go white and stay that way
Don't touch phone or cable till JAF says "done".
Flash Complete
NOW read carefully...
Now Disable/uninstall PC suite, SW Updater (NSU). (just right click on pc suite taskbar icon and click exit)
Download and install JAF
Download link:
http://rapidshare.com/files/245475090/jaf_1.98.62_setup.exe
Open JAF
Go to BB5 tab
Connect phone in "PC suite" mode
tick manual flash, factory set and normal mode. Also CRT 308 but it's already ticked.
If you're flashin a DEAD phone, tick the manual flash, Factory set, Normal mode and dead flash.
And remove tick from CRT308
select the
MCU (the renamed **.c0r file),
PPM,
CNT (the **.image file),
Plug in the phone to charger.
In case of dead flashing, don't connect the charger yet.
HIT "FLASH"
Hit "OK"
In case of dead flashing, When jaf says "PRESS POWER ON NOW" , connect the charger and turn on the phone.
the screen should go white and stay that way
Don't touch phone or cable till JAF says "done".
Flash Complete
No comments:
Post a Comment